1. Field investigation
This refers to the fact that before the installation of some outdoor LED displays, they should be tested according to the specific environment, topography, luminous radiation range, brightness acceptance and other parameters. The commander implements a unified hoisting plan to ensure that the equipment can be used normally and stably.
2. Construction of LED equipment
For the construction of some outdoor led billboards, it is necessary to distinguish between wall advertising screens, hanging advertising screens and roof advertising screens. During the actual installation, cranes and hoists should be used for segmented hoisting according to the distance and height, and at the same time to ensure that the above personnel cooperate with each other, there is a better installation and use process for the LED advertising screen for high-altitude operation.
3. Debugging of luminous radiation range
Next, it is necessary to carry out the specific radiation range detection. Due to the different radiation ranges, the LED display has different viewing angles. The outdoor LED display should be fixed and installed according to the field acceptance ability and your usual viewing angle range to ensure that each angle is far away. From a distance, you can see normal, well-balanced images and subtitle information
4. Follow-up inspection and maintenance
Subsequent testing includes many areas, such as LED display waterproofing, heat dissipation layer, LED display waterproof coating, rain shielding area on the display screen, heat dissipation space on both sides, power supply line, etc. These basic components constitute the entire stability. For the graphic LED display with good performance, the later technical maintenance requires unified management and maintenance of these components. When the product is rusted, unstable or damaged, it needs to be replaced in time to ensure the safe use of the entire display.