More and more managers of health centers, medical offices and clinics have decided to bet on LED screens in hospitals. Receptions, waiting rooms, cafeterias and other public areas and rooms are very suitable for installing these LED advertising and informational stands for patients, visitors, medical and administrative personnel. The versatility of the content is one of the advantages of any LED screen, since this format allows to provide promotional space and useful information, such as advice on health, news, data on facilities, etc. There are also entertainment activities, which can make the waiting time for patients and those who visit them more pleasant. Let's learn how to use hospital LED displays correctly.
How to use the hospital high-definition LED display:
1. Check the circuit and switch of the hospital's high-definition LED display screen, keep the switch dry, and avoid leakage and electric shock accidents.
2. The air conditioner can be used to dehumidify the hospital LED high-definition display, and the desiccant and physical moisture absorption can be placed to keep it dry and prevent the display from getting wet.
3. During the rainy season, the LED screen display is guaranteed to be used at least once a week, and it is lit for at least 2 hours each time.
4. The hospital LED high-definition display is properly ventilated, which can quickly evaporate the water vapor attached to the display and reduce the humidity of the indoor environment. But it should be noted that: avoid ventilation in some windless and humid weather, which will aggravate the indoor temperature.
5. The use environment of outdoor hospital LED high-definition display is complex, and it is inevitable that there will be water seepage in the box. In addition to the above measures, it is usually necessary to regularly check whether the waterproof rubber ring of the box is aging, deformed and incomplete; whether the screws or locks of the sealing box are easy to loosen and the pressure is not enough.
6. When renting an indoor hospital LED high-definition display for outdoor use, it must be powered off immediately when it rains. If you are not in a hurry to dismantle the screen, you can quickly cover it with a rain-proof cloth prepared in advance. When it is sunny, take out the clean body and dribble it. If it encounters continuous rain, it is necessary to open the back cover of the box and use a fan to dry it with cold air. Then put it in a ventilated and dry room for more than 8 hours at night. Turn down the brightness of the display screen and ensure that the screen body is lit for more than 4 hours to fully dissipate the moisture in the electronic components.
7. If the hospital LED high-definition display is not used for a long time, it should be powered on for maintenance and debugging. Whether it is an indoor hospital LED high-definition display or an outdoor hospital LED high-definition display, if it is not used for a long time, it is likely that dead lights and dead lights will appear when it is activated again. Be blind. Therefore, it is necessary to power on and light up the screen frequently for debugging.
